• NEWS

Introduction of processing raw materials, production methods and working structure of sawdust pellet machine
Time : 2023-08-07

Introduction of processing raw materials, production methods and working structure of sawdust pellet machine

The sawdust pellet machine is mainly used in large furniture factories, timber factories, sawings produced by various woods in the production process, or the skins, shells, straws of various crops, etc., as raw materials for processing into renewable fuel pellets. . The sawdust pellet machine effectively solves the disposal of various enterprise production waste and crop waste, and also provides people with more fuel energy.


The raw materials used in the sawdust pellet machine are:

The sawdust pellet machine is used to make biomass fuel pellets. The main raw materials are: waste in the production process of the enterprise: domestic waste, construction waste, enterprise production waste, crop straw, various branches, bark, business, wood waste, rice Shells, peanut shells, bamboo chips, sugar cane chips, palm shells.

 

The production mode and working structure of the vertical sawdust pellet machine:

Feeding method: the mold is square, the mouth of the ring die is upward, and the material directly enters the granulation mold from top to bottom without clogging.

 

Pressing method: The specific gravity of the sawdust is very light. After entering the mold from top to bottom, the sawdust is driven by the pressure wheel to distribute to the surroundings, and the sawdust is evenly pressed.

 

Machine structure: The vertical ring die pellet machine is open upwards, which is easy to dissipate heat. The mold is refined and rotated by the pressing wheel to squeeze the sawdust out of the mold to form pellets.

 

Equipment operation: The vertical ring die granulator is a vertical shaft, and the large cast steel bearing supports the mold. The large bearing will not bear any pressure from the mold, which increases the service life.

 

Equipment stability: The vertical ring die granulator rotates the powder by the pressure wheel, which will not produce heavy material or vibration.