Large Straw Rotary Cutting And Crushing Machine
WhatsApp:+86-13705416489
Email: zqqbd88@zqqianbaidu.com
CONTACT US
Products Detail
Production Process
Products Recommended

1. Large-diameter feeding The feeding diameter is 2325mm. The large diameter is convenient for feeding piled or bundled materials, such as piled straw, pasture or bundled straw and pasture. The height of the feeding port for intermittent feeding, continuous crushing and spraying is about 1.2 meters. Because of its large diameter and high height, a large amount of material can be fed at one time, and then the rotation of the feeding port drives the material to move to the rotor of the pulverizer, so that the material is continuously The material is crushed, which realizes intermittent feeding and reduces the feeding intensity of workers. The crushed material rotates with the rotor at high speed and flies out from the discharge port under the action of centrifugal force at high speed. , to achieve high productivity and low power consumption.


2. The core component of the equipment integrating chopping and crushing is the crushing rotor with disc cutters and hammers installed on the rotor. When working, large-volume materials are cut into small volumes by the disc cutters, and then crushed by hammers. This working method of crushing after chopping improves the crushing efficiency.


3. The core components are made of wear-resistant and tough alloy. The core components of the equipment are mainly rock cutters and hammers. These parts are made of alloys with good toughness and strong impact resistance. The disc cutter has high hardness and toughness after heat treatment. Wear resistance, super wear-resistant hard alloy materials are welded on the two working edges of the hammer, which greatly improves its service life.


Model

XQJ3000

Power (Kw)

75/90+4

转子直径(mm)

735*2个

Feed Size(mm

2250

Number Of Disc Cutters (Blocks)

5

Hammer Quantity (Block)

88+92

Side Knife (Block)

1

Fixed Knife (Block)

4/5

Rotor Speed(r/min

2120

Manufacturability(t/h

4-5


Wood Pellet Production Process

This process can be used for the production and processing of most raw materials. The factory will adjust the process according to the different raw materials.

Wood Pellet Production Process

This process can be used for the production and processing of most raw materials. The factory will adjust the process according to the different raw materials.

FAQs