Waste Wood Pellet Production Line For Wood Blocks, Boards, Branches,Etc.
WhatsApp:+86-13705416489
Email: zqqbd88@zqqianbaidu.com
CONTACT US
Products Detail
Production Process
Products Recommended

Production per hour: 10T-15T


Raw materials: waste boards - fresh branches - wood blocks


Moisture content: 35%--55%


Application: Pellet combustion.


Labor: 3-10 people.


8T/H transformer ≥ 500 kVA.


10T/H transformer ≥ 1000 kVA.


Recommended users: large wood processing plants, garden companies, orchards, fuel


Analysis of the production process of fresh branches, wood blocks, waste boards and other raw materials to make granules

Process flow:


1. Crushing: Waste boards, wood blocks, fresh branches, etc. are coarsely powdered to crush scraps, slender materials, thin logs and other heavy-weight broken materials and pure logs ≤ Ø500.


2. Crushing: The crushed raw materials are finely powdered by a large-scale high-efficiency pulverizer, and the output of a single machine is from 6-8T, which can meet various needs.


3. Drying: The finely powdered material enters the drum dryer for drying to achieve the moisture humidity required for granulation.


4. Granulation: After the dried material enters the silo, it enters the granulator through the spiral dragon for granulation.


5. Cooling: High temperature particles are transported into the cooler through the skirt belt for cooling;


6. Packaging: The cooled granules enter the packaging machine for packaging.


Process advantages: the cost of raw materials is relatively low, the pellet forming effect is good, and the profit margin is relatively large.

Process disadvantages: Due to the shortage of raw materials, it is difficult to increase production capacity.



Wood Pellet Production Process

This process can be used for the production and processing of most raw materials. The factory will adjust the process according to the different raw materials.

Wood Pellet Production Process

This process can be used for the production and processing of most raw materials. The factory will adjust the process according to the different raw materials.

FAQs